Product specification: ( CE certificate & ROHS compliant ) LxWxH : 93.5 X 60 X 17 mm
2.
Measureable battery type and amount: Li-Polymer/Li-Fe 2 ~ 6
3.
Cell(standard voltage 7.4 V ~ 22.2 V using divided voltage joint).
4.
Receiver battery 1.2 V ~ 8.5V DC (Not limit battery type, but need external power source 7.4~11.1V, use JST joint)
5.
Balance voltage setting range(lower limit):2.0V ~ 3.9V(pre-setting value 3.2V)
6.
Discharge voltage setting range (lower limit):3.0V~ 4.2V(pre-setting value 3.9V)
7.
Net weight is 70g without package.
8.
Max. bleeding current : 450 mA ( at 4.2V / cell )
Rx_Batt measurement
Product instruction:
The Battery Meter/Balancer/Discharger is designed for Li-Polymer and Li-Fe
battery, it can measure battery voltage precisely and execute balance
work for series batteries, or for battery discharge in order to for long
time storage to avoid battery damaged. It can be used as a portable battery
meter as it is lightweight, self-contained and with a large
display. You can also bring the Balancer to the flying field for battery
checking purpose.
The product balance function can allow battery execute balance function before/after charge and using(discharge), also can match-up market string voltage charger to execute devide voltage balancing function while charging.
The product is used big size screen, it can show 6 cell batteries condition. It only uses 3 key to control all function, user can judge batteries condition soon, and can operate all function single-handed.
背板散熱孔設計，防止過熱。 Thermal-backplane ventilation design, to prevent overheating.
背板散熱，可避免灰塵入侵，散熱效果更佳。
Backplane heat, dust invasion can be avoided, better heat dissipation effect.
不需擔心機體於工作時高溫受損。 Don't worry about the temperature when the unit is in operation.
另有JST接頭及接收機電源接頭。 Included JST connectors and Another receiver power connectors.
MKS 3 IN 1 Battery Balancer LCD display ( CE certificate & ROHS compliant )
This product comes with temperature sensor IC control, When the temperature inside exceeds 75°C.
It will goes back to discharge when the temperature inside is lower than 65°C. It will shutdown discharge for a while. Net weight is 70g without package.
Item: CCPM (3mix)
Specifications：
1.
Apply to any 4CH TO CCPM Heli
2.
Provides sole CH and gearing Reverse Switch choose
3.
Voltage : 3.5 ~ 7.2V
4.
apply to Heli,
5.
Anguler Resolution 0.5us (0.05°/anguler)
6.
Size : 34*17*9mm。
Item: Battery Protect
Specifications：
1.
Auto cell detect for any 2 ~ 4 Cells。
2.
Protects each monomer battery whether crosses the electric discharge,and weakens the dynamic output and the lamp signal police shows。
3.
Battery low voltage (3.10V/3.30V)Winter/Summer Switch。
MKS SUPER POWER LI-POLY-SMART
AUTO BALANCER provides balancing and safer charging
for your Li-Poly batteries. And, this balancer is
for 2 to 5 cells, if your battery is 2 and 4 cells;
please purchase switch line to operate. It is important
to read the manual in order to use the balancer correctly. Precautions：
Do not use in sun light.
Do not use in high temperature.
Do not connect 4 pin and 6 pin connectors at a same time.
Do not connect 2 balancers to a single pack.
If you finished using balancer, please unplug the thread.
When battery voltage is： > 0.005
mv the yellow light will turn on。
When battery voltage is： < 0.005
mv the green light will turn on。
If you use different 2 cell or 4 cell batteries, please purchase the special use connector。
MKS 3 IN 1 Battery Balancer LCD Display 三合一電池平衡顯示器
